Table of Contents
Advertisement
Configuration Wizard
1
2
3
1553-ZAT 759 95 Uen C – July 2005
The first page is the Wireless Network: Set Country:
Since wireless networking uses radio signals, the HM490dp has to be
configured for the correct frequencies according to national regulations.
Select the country you currently are in and click the
button. The Wireless Network: Basic page appears:
The SSID (Service Set Identifier) is the unique name of your wireless
network. The default configured SSID consist of the product name and
the last six characters of the unit's wireless MAC address. This MAC
address can be found on a label at the bottom of the unit.
The default SSID can be changed and may be any combination of
numbers and/or letters with a maximum length of 32 characters. Your
wireless clients will scan the air and find the SSID of all available
networks. If more than one is found, you have to select the correct one.
Check the "Hide SSID" box if you don't want the HM490dp to send out
the SSID. If this is done, you must manually insert the SSID to your
wireless client(s).
Click the
button. The Wireless Network: Channel Selection
Next>
page appears:
Confirm Changes>
25
Advertisement
Table of Contents
