Create Fixed Host Mapping - Ericsson HM410dp User Manual

Advanced Setup
DNS server option information includes settings for the DNS server. You
can check the "Use local host address as DNS server" box to use this host
as the default DNS. Or, you can uncheck the box and manually set up the
DNS IP address in the "Primary/Secondary DNS server address".
The DNS server addresses will be passed to the DHCP clients along with
the IP addresses. The DHCP clients use the DNS to map a domain name
to its corresponding IP address and vice versa.
Default gateway option information; The HM410dp always uses local
host as default gateway.
When you have entered the details for the DHCP Server Subnet
configuration, click the
Use the
5.5.3

Create Fixed Host Mapping

You can add a fixed host mapping to the DHCP server c onfiguration. This
allows you to configure the DHCP server to assign a specific IP addaress to
a specific DHCP client based on the client's MAC addaress.
The lower part of the DHCP Server page includes settings for "Fixed
Hosts":
To create a new mapping click the Create link to view the following page:
54
Confirm Changes
button to reset all settings to default settings.
Reset
button.
1553-ZAT 759 94 Uen B – July 2005