Table of Contents
Advertisement
Configure PCs
10 In Network and Dial-up Connections window, right-click the Network
11 In the Network Properties dialog box, select TCP/IP, and then click the
12 In the TCP/IP Settings dialog box, click the radio button labeled Server
13 Click
6.2.1.4
Windows 95, 98
First, check for the IP protocol and, if necessary, install it:
1
2
3
4
5
6
7
Next, configure the PC to accept IP information assigned by the HM490dp:
8
9
84
icon, and then click the
button.
Properties
assigned IP address. Also click the radio button labeled Server
assigned name server address.
twice to confirm and save your changes, and then close the
OK
Control Panel.
In the Windows task bar, click the Start button, point to Settings and
then click Control Panel.
Double-click the Network icon.
The Network dialog box displays with a list of currently installed
network components. If the list includes TCP/IP, then the protocol has
already been enabled. Skip to step 9.
If TCP/IP does not display as an installed component, click the
button. The Select Network Component Type dialog box displays.
Select Protocol, and then click the
The Select Network Protocol dialog box displays.
Click on Microsoft in the Manufacturers list box, and then click TCP/IP
in the Network Protocols list box.
Click
to return to the Network dialog box, and then click
OK
again. You may be prompted to install files from your Windows 95/98
installation CD. Follow the instructions to install the files.
Click
to restart the PC and complete the TCP/IP installation.
OK
Open the Control Panel window, and then click the Network icon.
Select the network component labeled TCP/IP, and then click the
button.
Properties
If you have multiple TCP/IP listings, select the listing associated with
your network card or adapter.
button.
Properties
button.
Add...
Add...
OK
1553-ZAT 759 95 Uen C – June 2005
Advertisement
Table of Contents
