Table of Contents
Advertisement
Hardware Description and Installation
4
5
6
Note:
1553-ZAT 759 95 Uen C – July 2005
Ethernet on the HM490dp.
Connect the other end to an Ethernet port on a PC, Set-Top Box, IP
telephone or Ethernet switch/hub. You can simultaneously use as
many cables and ports that you need depending on available services
and devices.
Connect the Power adapter
Connect the cable from the Power Adapter to the POWER socket on
the HM490dp and then insert the plug into a power source.
Switch on the Power
Switch on the power by turning the power switch to 1.
Wireless computer(s)
You must run the Configuration Wizard (as described in chapter 3
"Configuration Wizard") and enable the Wireless LAN interface before
your wireless computer(s) can connect to the HM490dp.
The Configuration Wizard has to be run from a client PC connected
to one of the Ethernet ports as the Wireless LAN interface is
disabled by default.
9
Advertisement
Table of Contents
