Table of Contents
Advertisement
Advanced Setup
5
Note:
6
7
1553-ZAT 759 95 Uen C – July 2005
Type a port range by entering the start and end of the range in the two
boxes provided. If you want to use a single port, enter the port number
in the first box and leave the second box blank.
You must ensure that the single port or range specified does not
overlap with a port or range for an existing common or custom
application. See the common port ranges listed in section 5.5.3 –
"Configure Security".
Select the address translation type (NONE, TCP, UDP or TCP and
UDP) from the drop-down list. This controls the translation of binary IP
addresses in the payload of a packet (the part containing data). Click
the
button to display the confirmation page:
Next>
This page confirms you custom application configuration. If you are
happy with the details displayed, click the
You will return to the Security: Custom Applications page containing
details of the custom application that you have just created.
button.
Confirm Changes
65
Advertisement
Table of Contents
