Ericsson HM490dp User Manual page 88

Configure PCs
4
5
6
6.2.1.2 Windows 2000
First, check for the IP protocol and, if necessary, install it:
1
2
3
4
5
6
7
Next, configure the PCs to accept IP information assigned by the
HM490dp:
8
82
The Local Area Connection dialog box is displayed with a list of
currently installed network items.
Ensure that the check box to the left of the item labeled Internet
Protocol TCP/IP is checked and click the
In the Internet Protocol (TCP/IP) Properties dialog box, click the radio
button labeled Obtain an IP address automatically. Also click the
radio button labeled Obtain DNS server address automatically.
Click twice to confirm your changes, and then close the Control
OK
Panel.
In the Windows task bar, click the Start button, point to Settings, and
then click Control Panel.
Double-click the Network and Dial-up Connections icon.
In the Network and Dial-up Connections window, right-click the Local
Area Connection icon, and then click the
The Local Area Connection Properties dialog box is displayed with a
list of currently installed network components. If the list includes
Internet Protocol (TCP/IP), then the protocol has already been
enabled. Skip to step 10.
If Internet Protocol (TCP/IP) does not display as an installed
component, click the
In the Select Network Component Type dialog box, select Protocol,
and then click the
Add...
Select Internet Protocol (TCP/IP) in the Network Protocols list, and
then click .
OK
You may be prompted to install files from your Windows 2000
installation CD or other media. Follow the instructions to install the files.
If prompted, click
OK
In the Control Panel, double-click the Network and Dial-up
Connections icon.
button.
Install...
button.
to restart your computer with the new settings.
button.
Properties
button.
Properties
1553-ZAT 759 95 Uen C – June 2005