Table of Contents
Advertisement
Advanced Setup
Application
File Transfer Protocol (FTP)
Internet Key Exchange (IKE)
Session Initiation Protocol (SIP)
5.5.7.1
Enable/Disable ALGs
The supported ALGs are all enabled by default, but can be disabled
individually.
To enable/disable an ALG follow the steps below:
1
2
Note:
1553-ZAT 759 95 Uen C – July 2005
From the Advanced Setup menu, click on Security. At the bottom of
the page the "ALG State" part is displayed:
Select the appropriate mode (Enabled/Disabled) and click the
button for each ALG you want to change state for.
Change State
To save the ALG changes permanently, you MUST perform a Save
Config. From the left hand menu, select Advanced Setup > Save
Config and then click the
TCP port
number
21
N/A
5060
button.
Save
UDP port
number
N/A
500
5060
67
Advertisement
Table of Contents
