Table of Contents
Advertisement
Hardware Description and Installation
Table 2
Label
ADSL
Ethernet
Reset
0 | 1
12V AC 1.2A
2.3
Placement of the HM490dp
The HM490dp can be placed either in a horizontal or upright position on a
flat surface (i.e. a table) as shown in the figures below.
Note:
6
Description of Connectors and Buttons
Description
ADSL socket for connection to a splitter/filter of phone
outlet.
Four Ethernet ports for connection to a PC, IP telephone,
set-top box, and/or switch/hub.
Reset button (tiny hole) for resetting the HM490dp to
factory default settings. Section 5.10.1.1 – "Reset
Button" describes how a reset is done.
Power switch for turning power on or off.
Power socket for connecting the power supply adapter.
Proper ventilation is necessary to prevent the product from over-
heating. Do not block or cover the slots and openings on the
device, which are intended for ventilation and proper operation.
Figure 3 - Alternative Placement for the HM490dp
1553-ZAT 759 95 Uen C – June 2005
Advertisement
Table of Contents
