Ericsson HM490dp User Manual page 89

Configure PCs
9
10 In the Local Area Connection Properties dialog box, select Internet
11 In the Internet Protocol (TCP/IP) Properties dialog box, click the radio
12 Click
6.2.1.3 Windows Me
First, check for the IP protocol and, if necessary, install it:
1
2
3
4
5
6
7
8
Next, configure the PC to accept IP information assigned by the HM490dp:
9
1553-ZAT 759 95 Uen C – July 2005
In Network and Dial-up Connections window, right-click the Local Area
Connection icon, and then click the
protocol (TCP/IP), and then click the
button labeled Obtain an IP address automatically. Also click the
radio button labeled Obtain DNS server address automatically.
twice to confirm and save your changes, and then close the
OK
Control Panel.
In the Windows task bar, click the Start button, point to Settings, and
then click Control Panel.
Double-click the Network and Dial-up Connections icon.
In the Network and Dial-up Connections window, right-click the
Network icon, and then click the
The Network Properties dialog box is displayed with a list of currently
installed network components. If the list includes Internet Protocol
(TCP/IP), then the protocol has already been enabled. Skip to step 11.
If Internet Protocol (TCP/IP) does not display as an installed
component, click the
In the Select Network Component Type dialog box, select Protocol,
and then click the
Add...
Select Microsoft in the Manufacturers box.
Select Internet Protocol (TCP/IP) in the Network Protocols list, and
then click .
OK
You may be prompted to install files from your Windows Me installation
CD or other media. Follow the instructions to install the files.
If prompted, click
OK
In the Control Panel, double-click the Network and Dial-up
Connections icon.
Properties
Properties
Properties
button.
Add...
button.
to restart your computer with new settings.
button.
button.
button.
83