Hydraulic Brakes - Arctic Cat 2008 400 4x4 Owner's Manual

Hide thumbs Also See for 2008 400 4x4:
Table of Contents

Advertisement

! CAUTION
Inspect the oil for any signs of metal fi lings or water. If found, take
the ATV to an authorized Arctic Cat ATV dealer for servicing.
5. Pour recommended oil into each fi ller hole.
n
Note:
If the gear case has a level plug, fi ll to the threads of the level plug.
If the gear case has only a fi ll plug, fi ll to within 1 in. of the threads of
the fi ll plug.
n
Note:
Arctic Cat recommends the use of genuine Arctic Cat lubricants.
6. Install the fi ller plugs and level plugs.

HYDRAULIC BRAKES

! WARNING
Be sure to inspect the hydraulic brake system before each use.
Always maintain brakes according to the Maintenance Schedule.
Brake Fluid
Check the brake fl uid level in the
hand brake fl uid reservoir. If the
level in the reservoir is not visible
in the sight glass, add DOT 4 brake
fl uid.
Check the brake fl uid level in the
foot brake reservoir.
The level must be maintained
between the MAX and MIN level
marks.
If the level in the reservoir is low,
add DOT4 brake fl uid.
n
Note:
The brake fl uid reservoir is located under the seat.
76

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 400 2x4

Table of Contents