Arctic Cat 2008 400 4x4 Owner's Manual page 65

Right Hand Brake Lever
The right hand brake lever is con-
sidered to be the auxiliary brake.
Apply the brake by compressing the
lever toward the handlebar.
Brake Lever lock (Parking Brake)
To engage and release the brake
lever lock, use the following pro-
cedure.
1. Pull the right hand brake lever.
2. While pushing forward on the
brake lever lock, squeeze the brake
lever.
n Note:
It will click as it engages and the brake lever will not return to its re-
leased position.
4. Release the brake lever lock by squeezing the brake lever. It will
return to its released position.
Check to make sure the brake lever lock engages properly and that
the brake (when engaged) locks the rear wheels.
1. Engage the brake lever lock.
2. Attempt to push the ATV.
n Note:
The brake lever lock must lock the wheels. If it doesn't, take the ATV
to an authorized Arctic Cat ATV dealer for service.
! WARNING
Always check to be sure that the brake lever lock has been disen-
gaged before operating the ATV. An accident could result if the bra-
ke lever lock is left engaged while the ATV is operated. The brake
may relax if left engaged for a long period of time. This could cause
an accident; therefore, do not leave the ATV on a hill depending on
the brake lever lock. Always block the downhill side of the wheels if
leaving the ATV on a hill or park the ATV in a sidehill position.
64