General Lubrication - Arctic Cat 2008 400 4x4 Owner's Manual

n Note:
Use a spanner wrench to adjust the sleeve to the desired position.
Position Sprungkraft
Position Spring Force
1
2
3
4
5
stark
Stronger

GENERAL LUBRICATION

Lubrication Points
It is advisable to lubricate certain components periodically and before
storage to ensure free movement.
1. Brake Lever Holder (oil)
2 1
2. Throttle Lever (oil)
3
3. Steering Shaft Holder (grease)
4. Brake Pedal Pivot (grease)
5. Shift Rod Ball Joints (oil)
5
4
Engine/Transmission Oil and Filter
Change the engine oil and oil fi lter at the scheduled intervals. The
engine should always be warm when the oil is changed so the oil will
drain easily and completely.
1. Park the ATV on level ground.
2. Loosen the oil level stick. Be
3. Remove the drain plug from
4. Remove the oil fi lter plug from
74
Einstellung Last
Setting Load
weich leicht
Soft Light
hart schwer
Stiff Heavy
careful not to allow conta-
minates to enter the opening.
the bottom of the engine and
drain the oil into a drain pan.
the fi lter mounting boss (loca
ted on the front-right side of
the transmission case) and
allow the fi lter to drain comple-
tely.