Cooling System; Shock Absorbers - Arctic Cat 2008 400 4x4 Owner's Manual

MAINTENANCE IN DETAIL

COOLING SYSTEM

n Note:
Arctic Cat recommends the use of genuine Arctic Cat lubricants.
! CAUTION
Continued operation of the ATV with high engine temperature may
result in engine damage or premature wear.
n Note:
High engine RPM, low vehicle speed, or heavy load can raise engine
temperature. Decreasing engine RPM, reducing load, and selecting
an appropriate transmission gear can lower the temperature.

SHOCK ABSORBERS

Each shock absorber should be visibly checked weekly for excessive
fl uid leakage (some seal leakage may be observed but it does not
indicate the shock is in need of replacement), cracks or breaks in
the lower case, or a bent shock rod. If any one of these conditions is
detected, replacement is necessary.
n Note:
When the ATV is operated in extremely cold weather (-23°C/-10°F or
colder), a small amount of leakage may be present.
Unless the leakage is excessive,
replacement
The shock absorber has a spring
force adjustment sleeve with fi ve
adjustment positions to allow the
spring to be adjusted for different
riding and loading conditions. If the
spring action is too soft or too stiff,
adjust it according to the chart.
is not necessary.
73