Arctic Cat 2008 400 4x4 Owner's Manual page 37

Active Riding
Parking
Parking involves following the previous rules for braking; then:
1. After the ATV stops, shift into neutral.
2. Stop the engine using the engine stop switch.
3. Turn off the ignition.
4. If you have to park on a hill, shift the ATV into low range and block
the rear wheels;
5. otherwise, try to park only on level surfaces.
6. Engage the brake lever lock.
Dismounting the ATV
After you've followed the procedure for parking, it's time to dismount:
1. Double check that the brake lever lock is engaged.
2. Swing your right leg over to the left side of the seat.
3. Step to the ground on the left side of the ATV.
36