Arctic Cat 2008 400 4x4 Owner's Manual page 64

n Note:
Clock memory power is supplied through the 15-amp accessory fuse
and verifi ed during gauge "power-up" and reset. In the event of clock
memory power failure (blown fuse, etc.), the gauge will "power-up,"
reset, and shut down repeatedly until clock memory power is resto-
red. Always check the 15-amp accessory fuse if this gauge condition
is noted.
D. To reset the trip meter, press and hold the Adjust Button (1) until
TRIP is displayed in the display; then press and hold the Adjust/Set
Button (1) and Mode Button (2) until the trip meter reads 0.
Shift Lever
To engage the high range from
neutral, apply the brakes and move
the shift lever forward.
To engage the low range from
high range, apply the brakes and
move the shift lever outward and
forward.
To engage reverse gear from neu-
KM203A
tral, apply the brakes and move the
shift lever outward and rearward into the R position.
! WARNING
Never shift the ATV into reverse gear when the ATV is moving as it
could cause the ATV to stop suddenly throwing the operator from
the ATV.
Foot Brake Pedal or Left Hand Brake Lever
Pressing the foot brake pedal
downwards or compressing the
hand brake lever will apply the bra-
ke to the front and rear wheels.
KM130
63