Hydraulic Brakes; Brake Fluid - Arctic Cat 2012 XC 4501 Operator's Manual

2. Remove each oil filler plug.
3. Drain the oil into a drain pan by
removing in turn the drain plug
from each.
4. After all the oil has been
drained, install the drain plugs
and tighten securely.
CAUTION
Inspect the oil for any signs of
metal filings or water. If found,
take the ATV to an authorized
Arctic Cat ATV dealer for ser-
vicing.
5. Pour recommended oil into
each filler hole.

NOTE: If the gear case has a
level plug, fill to the threads of
the level plug. If the gear case
has only a fill plug, fill to
within 1 in. of the threads of
the fill plug.

NOTE: Arctic Cat recom-
mends the use of genuine Arc-
tic Cat lubricants.
6. Install the filler plugs and
level plugs.

Hydraulic Brakes

Be sure to inspect the hydraulic brake system before each
use. Always maintain brakes according to the Maintenance
Schedule.

Brake Fluid

CF107B
Check the brake fluid level in the
brake fluid reservoir. If the level in
the reservoir is not visible in the
sight glass, add DOT 4 brake fluid.

NOTE: If the sight glass
windows appear dark, there is
a sufficient amount of fluid in
the reservoir.
CF106C
Be careful not to spill any fluid when filling the brake fluid
reservoir. Wipe away spilled fluid immediately.
Brake Lever Lock
(Right Hand Brake)
Check to make sure the brake
lever lock engages properly and
CF113A
that the brake (when engaged)
locks the front wheels.
1. Pump the brake lever 2 or 3
times.
2. Engage the brake lever lock.
3. Attempt to push the ATV.
CF116A
! WARNING
CAUTION
KC387A
KC377A
49