Pitney Bowes DM100i series Operator's Manual page 73

Replacing the Ink Cartridge/Printhead (continued)
6. Remove the tape from the bottom of the new ink cartridge.
7. Lower the ink cartridge into the cavity. The ridges on either side
of the cartridge will slide into the grooves.
Ridge
Ridge
8. Rotate the guard back to the closed position.
9. Close the top cover. The system
automatically recognises the
new cartridge and in a few
moments returns you to the
Home screen.
Refit the weighing platform if it
was removed previously.
SDC570G
7 • Maintenance
Groove
7-5