3 • Running Mail
Keying In the Postage Directly
1. From the Home screen, enter the postage using the numeric
keys. There is no need to enter the decimal point.
2. Press Yes/Enter to confirm the amount.
Entering Weight Manually
This procedure is used when you already know the weight of a mail
piece and you are not using an integrated weighing platform.
1. Press Weigh/Rate.
2. Select "Enter manual weight".
3. Select "Change to g/kg" to switch between entering the weight in
grammes or kilogrammes, as required.
4. Key in the weight in grammes or kilogrammes then select
"Continue".
5. Select the carrier and then the desired class by pressing the key
next to "the Class of Mail" (use the scroll keys to see additional
classes).
6. If there is no value next to the class name, more information
is needed. Follow the prompts for the options and/or services
available for this class of service.
7. Select "Done" when finished entering all the class options and fees.
Using the Weighing Platform (Scale)
'Standard' Operation
1. Make sure scale is activated (you will see "0 g" next to SCALE:
on the display). See Chapter 6, System Optons to turn your
scale on if necessary.
2. Place mail piece on scale. The weight of the mail piece will
appear next to "Scale" on the display.
3. Select the carrier and then the desired class by pressing the key
next to "the Class of Mail" (use the scroll keys to see additional
classes).
4. If there is no value next to the class name, more information
is needed. Follow the prompts for the options and/or services
available for this class of service.
5. Select "Done" when finished entering all the class options and fees.
3-4
SDC570G