Set Mode - Icom IC-M87 Instruction Manual

D Battery voltage indicator "bt"
This function contains display or non-display settings of the
voltage of the connected battery pack when the power is
ON.
• The voltage of the connected battery pack is displayed for 2 sec.
after power is turned ON.
PUSH
Battery voltage OFF
(default)
D Scrambler code "cd"
There are 32 codes (1 to 32) available for programming.
In order to understand each other, all transceivers in your
group must have the same scramble code.
Scrambler code 1 (default)
Battery voltage ON
PUSH
Scrambler code 32
SET MODE LIST
Function
Beep tone function
Priority scan function
Scan resume timer
Auto scan function
Dual/Tri-watch function
Monitor switch action
Automatic backlighting
LCD contrast selection
Auto power save function
Self check function
Battery voltage indicator
Scrambler code
* default setting

SET MODE

Indication Switch
"bP" OFF / ON* / US
"Pr" OFF* / ON
"St" OFF* / ON
"AS" OFF* / ON
"dt" Dual* / Tri
"Sq" Push* / Hold
"bL" OFF / 1 / 2 / 3*
"LC" 1 / 2 / 3* / 4
"PS" OFF / ON*
"SC" OFF* / ON
"bt" OFF* / ON
"cd" 1* / 2 / / 32
8
21