Atex Cautions - Icom IC-M87 Instruction Manual

D Special conditions for safe use
The equipment is an intrinsically safe equipment. It can be used
in a potentially explosive atmosphere.
The equipment must be powered only by the battery Icom type
BP-227AX.
When the transceiver is used in a hazardous areas, either the
jack cover or HM-138 must be attached to the connector. Failure
to do this will make the radio ATEX non-compliant and may result
in an accident during use in hazardous areas.
The battery shall be charged only in non hazardous areas.
The battery shall be changed only in non hazardous areas.
Ambient operating temperature: –20°C to +55°C
D Meaning of ATEX marking codes
CE conformity Explosion protection
marking marking
Identification number of Equipment group:
notified body (where ap- (for mines)
propriate) (LCIE: 0081) (for other than mines)
Equipment conforms to types of protection stan-
dardized by CENELEC (European standards)
Intrinsic safety
according EN60079-0
Equipment category:
1 (for Zone 0 or 20)
2 (for Zone 1 or 21)
3 (for Zone 2 or 22)
Type of Explosive
atmosphere:
G (for gas, vapors
and mist)
D (for dusts)
Gas Group (see Fig. 1)
Marking temperatures
(see Fig. 1)

ATEX CAUTIONS

17
(Fig. 1)
33