Important; Explicit Definitions - Icom id- rp4000v Instruction Manual

IMPORTANT

R E A D T H I S I N S T RU C T I O N M A N UA L
CAREFULLY
before attempting to operate the ID-
RP4000V.
SAVE THIS INSTRUCTION MANUAL.
manual contains important safety and operating in-
structions for the ID-RP4000V.
Refer to the ID-RP2 instruction manual, supplied
with the ID-RP2C, about D-star system repeater
instruction, installation and precautions, etc. for
details.
Because of this instruction manual describes ID-
RP4000V's particular installation and precautions
only.
PRECAUTIONS
R WARNING RF EXPOSURE!
Radio Frequency energy. Extreme caution should
(RF)
be observed when operating this device. If you have
any questions regarding RF exposure and safety
standards please refer to the Federal Communica-
tions Commission Office of Engineering and Tech-
nology's report on Evaluating Compliance with FCC
Guidelines for Human Radio Frequency Electromag-
netic Fields
(OET Bulletin 65)
R WARNING HIGH VOLTAGE! NEVER
antenna or internal antenna connector during trans-
mission. This may result in an electrical shock or burn.
R WARNING HIGH VOLTAGE! NEVER
the antenna at any place that person touch the an-
tenna easily during transmission. This may result in
an electrical shock or burn.
R WARNING! NEVER
connector. This could cause a fire or damage the ID-
RP4000V.
R WARNING! NEVER
such as a 24 V battery, to the [DC 13.8V IN] connector.
This could cause a fire or damage the ID-RP4000V.
CAUTION: NEVER
jects touch any internal part or connectors on the ID-
RP4000V. This may result in an electric shock.
CAUTION: NEVER
RP4000V with wet hands. This may result in an elec-
tric shock or damage to the ID-RP4000V.
This device emits
.
attach an
apply AC to the [DC 13.8V IN]
apply more than 16 V DC,
let metal, wire or other ob-
operate or touch the ID-

EXPLICIT DEFINITIONS

WORD
R WARNING!
This
CAUTION
NOTE
CAUTION: NEVER
snow or any liquids.
DO NOT
use or place the ID-RP4000V in areas with
temperatures below –10°C
. Be aware that temperatures can exceed 80°C
(+122°F)
, resulting in permanent damage to the ID-
(+176°F)
RP4000V if left there for extended periods.
DO NOT
place the ID-RP4000V in excessively dusty
environments or in direct sunlig ht.
DO NOT
use harsh solvents such as benzine or al-
cohol when cleaning, as they can damage the ID-
RP4000V's surfaces.
install
DO NOT
modify the ID-RP4000V for any reason.
Place the ID-RP4000V in a secure place to avoid in-
advertent use by children.
Use the specified fuse only.
For the U.S.A. only
CAUTION:
RP4000V, not expressly approved by Icom Inc., could
void your authority to operate the ID-RP4000V under
FCC regulations.
Icom, Icom Inc. and the Icom logo are registered trade-
marks of Icom Incorporated (Japan) in Japan, the United
States, the United Kingdom, Germany, France, Spain, Rus-
sia and/or other countries.
Microsoft, Windows and Windows Vista are registered
trademarks of Microsoft Corporation in the United States
and/or other countries.
All other products or brands are registered trademarks or
trademarks of their respective holders.
i
DEFINITION
Personal injury, fire hazard or elec-
tric shock may occur.
Equipment damage may occur.
If disregarded, inconvenience only.
No risk or personal injury, fire or elec-
tric shock.
expose the ID-RP4000V to rain,
(+14°F)
Changes or modifications to the ID-
or above +50°C