Table of Contents
Advertisement
4
DRIVER INSTALLATION
D Microsoft
®
Windows
Click
Check the connected unit and connector names,
and COM port number.
(In this example, the USB serial port number is "3.")
®
98SE/Me
Click
q Start up Windows.
w Connect the PC and the ID-RP4000V [SERVICE T]
connector through a USB cable
.
separately)
e Right click "My Computer" then select "Properties."
r "System Properties" screen appears as at left.
Click [Device Manager] tub.
t Click "
" of Ports (COM&LPT).
y Confirm "ICOM ID-RP4000V SERVICE T (COMQ)"
is displayed.
• If not displayed, or few COM port numbers are dis-
played at the same time, the driver installation may not
be installed properly. Un-install the USB driver then re-
install the driver again in such cases.
NOTE: "Q" is the COM port number, that is
used for the communication setting with the util-
ity software.
<e.g.: When driver re-installation is required>
"ICOM ID-RP4000V SERVICE T (COMQ) (COMQ)"
23
23
(A-B type; purchase
Advertisement
Table of Contents
