Panasonic KX-HCM230 Operating Instructions Manual page 50

Operating Instructions
(9) Multi-Camera
(10) External Output
Control
(11) Indicator Control Sets Indicator operation. Indicator will be turned on
(12) Restart
(13) Update Firmware Updates the programme to operate the Network
(14) Reset to Factory
Default
(15) Help
50
Item
The Multi-Camera screen needs to set up these
parameters. Enter the Network Camera names and
IP addresses of each Network Camera. The Multi-
Camera can display up to four images in a window.
Refer to Page 78.
Sets the External Device Control Output setting to
attach the external sensors/devices. (Open or Short
to GND) Refer to Page 80 and Page 98.
in the default. Refer to Page 81.
Restarts the Network Camera retaining any settings
you entered. If any operational issues are changed,
try this option first. Refer to Page 82.
Camera on the latest version of the system. Refer to
Page 83.
Initialises all the parameters to the factory default.
Please note that all customer applied settings will be
lost, requiring you to reconfigure the entire Network
Camera. Refer to Page 86.
Provides you with the detail instructions of the terms
and functions of the Network Camera.
Description