Panasonic KX-HCM230 Operating Instructions Manual page 49

Item
(1) Go to Top Page
(2) Network
(3) Name/Time
(4) Security:
Administrator
(5) Security:
General User
(6) Top View Image
(7) Image Transfer
(8) Camera Setup
Jumps to the Top Page. The Top Page accesses to
Single/Multi-Camera screen in Motion JPEG/JPEG
- Regularly Refresh. Refer to Page 51.
Configures the network setting (Static/DHCP,
Default Gateway, Port No., DNS and Bandwidth).
Refer to Page 52.
Enters the Camera Name on the Single Camera
screen. Date and Time is used in the Alarm/Timer
mode in the Image Transfer feature and On the Air
time setting on the Top View Image Setting window.
NTP automatically adjusts the internal clock of the
Network Camera. Refer to Page 56.
Sets administrator ID and password for the security.
The authentication window can be enabled.
Administrator should control the Network Camera.
Refer to Page 58.
Sets General User ID and password for the security.
General User is the registered user. Refer to Page
60.
Sets the initial language, Title, Image URL, Link
URL, the image resolution, image quality, refreshing
interval and the Limit time of Continuous Motion and
On the Air time. Top View Image screen consists of
Single Camera and Multi-Camera screen. Refer to
Page 62.
Enables the Alarm/Timer mode in the Image
Transfer feature. The Network Camera can transfer
the image via e-mail or FTP. The alarm/timer trigger
can be set on the Image Transfer window. Refer to
Page 64.
Sets White Balance and Power Line Frequency.
You can lock the Brightness, Pan/Tilt/Preset and
Preset Programme Control feature. Refer to Page
76.
Operating Instructions
Description
49