Panasonic KX-HCM230 Operating Instructions Manual page 22

Operating Instructions
Network Parameters Table
Parameters
1
Port No.*
IP address
Subnet
Mask
Default
Gateway
DNS
Server 1, 2
Max.
Bandwidth
Usage
* When you use more than one Network Camera with a broadband router,
1
each Network Camera needs its own port no. The broadband router needs
the Port Forwarding feature. Refer to Page 32.
* Many ISP's intentionally block port no. 80 to guard against certain network
2
viruses. If your ISP blocks port no. 80, please substitute another unused
port no.
* Refer to the broadband router's manual for the Port Forwarding feature.
3
* When you use Network Camera in DHCP feature, check [DHCP] and enter
4
the Host Name if the ISP requires. If you automatically get the address of
Default Gateway and DNS server from DHCP server, you do not need to
set up.
22
Network Camera Configuration Type
[Type 1]
80 (default)
Check [Static],
and set the
static private
IP address.
Set the Subnet Mask fitted to your network.
Set Default Set the private
IP address
Gateway
address. of the broadband
router (on your
network), not
of the gateway
of the ISP. *
Set DNS server address.
It can restrict the transmit bandwidth.
Select from 0.1 to Unlimited Mbit/s.
[Type 2]
80 (default)*
Check [Static],
and set the
static private
IP address.* 3
3
[Type 3]
2
Check [Static],
and set the
static global
IP address.* 4
Set Default
Gateway
address.* 4
Set DNS
server
address.* 4
[Type 4]
80 (default)
192.168.0.253
(default)
255.255.255.0
(default)
You do not
need to
set up.