Panasonic KX-HCM230 Operating Instructions Manual page 97

Making holes on mortar wall
1.
Put Flexible Stand on the wall where you mount and mark the point where you
are going to make holes.
2.
Make holes with an electric drill. Put the plastic plugs (customer provided) into
the holes and push them inside the holes with the hammer.
Change the drill depending on the
concrete wall or the tiled wall.
Note
Mortar wall is easy to come off in drilling.
3.
Mount the Flexible Stand by using the screws (accessories).
Plastic Plug
Caulk around the holes
if you need.
Operating Instructions
Hammer
97