Panasonic KX-HCM230 Operating Instructions Manual page 94

Operating Instructions
Wall Mounting
1) Mount the Flexible Stand firmly to the wall or the beam using the three
screws (accessories). Please set the Flexible Stand 165 mm away
from the ceiling.
• Please use proper screws fit for the material of the wall.
2) Attach the Network Camera by screwing the threaded mount into the
tripod mounting hole. Mounting hole on the rear side is also available.
3) Adjust the position of the Network Camera and secure the Flexible
Stand firmly.
4) Roll up the cables and Flexible Stand with the Self Bonding tape
(accessories). Please refer to Page 92 for waterproofing the cables.
1)
165 mm
3)
94
2)
Caulk around Flexible
Stand if you need
4)
Please waterproof
the rest of the cable.
Self Bonding tape