Panasonic KX-HCM230 Operating Instructions Manual page 79

2.
Select/Enter the each parameter. Click [Save] when finishing.
• Click [Cancel] to quit the current settings. It returns to the Setup Page
without saving the parameters.
Enable check box
IP Address*
1
Name*
2
Camera Name*
* Please refer to IP addressing on Page 101.
1
* Please refer to unavailable character set 1 on Page 101
2
but [:] is available.
* Please refer to unavailable character set 1 on Page 101
3
and please refer to displayable character set on Page 102.
Instructions for the data fields
The checked camera image can be seen on the Multi-
Camera screen.
or Host Enter the desired IP address of the Network Camera
or Host Name and Port no.
(You do not need to enter port no. 80 [default].)
Enter the desired Camera Name displayed only for
3
the Multi-Camera screen.
Operating Instructions
79