Panasonic KX-HCM230 Operating Instructions Manual page 45

[Start Capture] : [Start Capture] saves the individual images to the
[Viewer]
[Primary]
[Secondary]
Notes
• When more than one clients were viewing, the refreshing interval
becomes slower.
• The image resolution, image quality and object situation affect the
number of frames in the Buffered Image.
• If an internal memory is filled after clicking [Start Capture], the image
buffering will stop automatically.
To save the still image on your PC
The PC can save the still images taken by JPEG - Regularly Refresh and
Buffered Image. The refreshing interval of JPEG - Regularly Refresh should
be 30 seconds or more in saving the image.
To save the image, place the cursor on the image and click the right button
of the mouse. Then select "Save Picture As...". Enter a picture name and
save.
Note
The PC cannot save Motion JPEG and [Play] mode images of Buffered
Image.
internal memory. Network traffic, PC performance, image
quality and image resolution influence [Play] mode time
and the refreshing interval of the image. The resolution is
the same as the current image settings. At a resolution of
320 x 240 in standard mode, the Network Camera stores
approximately 560 frames.
: [Viewer] enables you to view the image buffered by
clicking [Start Capture].
: [Primary] enables you to view the image buffered in the
primary time in the Alarm/Timer mode.
: [Secondary] enables you to view the image buffered in
the secondary time in the Alarm/Timer mode.
Operating Instructions
45