Data Options Tab - Honeywell MX8 Reference Manual

Data Options Tab

Start > Settings > System > Data Collection > Data Options tab
Bar code manipulation parameter settings on this tab are applied to the incoming data resulting from successful bar code scans
sent to the MX8 for processing.
Note: The Data Options tab contains only those options available for one type of decoding engine.
The Data Options tab contains several options to control bar code processing. Options include:
Defining custom Code IDs
l
Disable processing of specified bar code symbologies
l
Rejecting bar code data that is too short or too long
l
Stripping characters including Code ID, leading or trailing characters and specified bar code data strings
l
Replacing control characters
l
Adding a prefix and a suffix.
l
Factory Default Settings
Enable Code ID
MX8 with a Hand Held Products imager
Note: The HHP Properties button is only present if the MX8 is equipped with a Hand Held Products imager.
Choose an option in the Enable Code ID drop-down box: None, AIM, Symbol, HHP or Custom.
*HHP - Hand Held Products
None
MX8 with any other imager/scanner
5-9