Installation; Hard Disk Installation - EverFocus eZ.HD ECOR HD 16X1 User Manual

2.

Installation

2.1 Hard Disk Installation

You can optionally install four 3.5" HDDs inside the DVR for recording videos.
1. Make sure the DVR is power-off.
2. Unscrew the two housing screws on the back panel of the DVR.
3. Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
4. Use the SATA Cable, and connect one end to the SATA port on the small PCB inside the DVR, and the other
end to the SATA port on the HDD.
Silver Screw
HDD Bracket
10
ECOR HD 16X1 DVR
Chapter 2