Table of Contents
Advertisement
2. Hitch the hook of the DIN Rail Mounting Clips on the upper edge of DIN rail and then push
the video recorder to the DIN rail. You will hear a clip sound, which means it has been
locked to the DIN Rail tightly.
3. A typical mounting may look like the image below. You can mount the video recorder on
the DIN rail vertically or horizontally.
Note: The supplied DIN Rail Mounting Clips are applicable to the standard 35mm DIN Rails.
2.2 SD Card Installation
The video recorder provides SD card function for recording. Please follow the steps below to
install and activate the SD Card recording function. Up to 128GB SDHC/SDXC card capacity is
supported (see Tested SD Cards on the below page). Note that ESN41 FHD supports 2
SDHC/SDXC card slots and ESN41-E FHD supports 1 SDHC/SDXC card slot.
1. Insert the SD card(s) to the card slot(s) on the front panel of video recorder.
2. The video recorder will automatically detect when a new SD card has been inserted and
the below SD card format message will pop-up. Click Yes to format the SD card. Note that
only the formatted SD card can be used for recording.
3. After formatting the SD card(s), the system will enter the Live View window. By default, the
system will automatically record all the connected channels.
MoniVue System – Video Recorder
7
Advertisement
Table of Contents
