Record - EverFocus eZ.HD ECOR HD 16X1 User Manual

6.3 Record

You can configure the basic recording settings on the hard disk.
Record Overwrite: Check the box to overwrite the hard disk when it is full. Note that unless this box is checked, or
the DVR will stop recording when the hard disk is full. The use of record overwrite is strongly recommended. If you
do not use this feature, please be sure to enable the Event setting for Disk Full for notification (see 6.4.4 Other).
Schedule Record: Check the box to record by the schedule. Please see 6.8 Schedule Setting for more details.
Time Stamp: Select Bottom or Top to record the system date and time on the bottom / top of the image. Select off
will not record the system date and time in the recordings.
Record Status Relay Output: Select a number to monitor the recording status of the selected alarm relay. The
recording status of the selected alarm relay will be transmitted to the alarm output device.
Auto Erase Video: The hard disk will automatically erase video after it has been on the hard drive for the selected
number of days. To use the maximum hard drive space, choose "OFF". (See Record Overwrite and notes above.) This
feature is useful if local rules and regulations require recorded video to be discarded after a specific number of days,
or to limit the retention of older recorded video to clear space in anticipation of event recording.
Estimation Result: Shows the remaining storage space.
74
ECOR HD 16X1 DVR