EverFocus eZ.HD ECOR HD 16X1 User Manual page 89

FTP Upload File Type: Select MP4 file type to upload videos to FTP server; select JPEG file type to upload
snapshots to the FTP server.
Alarm Output: Select an alarm output relay. When an alarm is triggered, the signal will be transmitted through
the selected alarm output relay.
Output Type: Select an output type when an alarm is triggered.
Timeout: Select this option and then set up the Timeout Duration in the field below, the alarm output will
last for the setup duration time (10 ~ 150 seconds).
Permanent: Alarm will remain active until the user presses the "Enter" key on the IR Remote Control or
resets the alarm remotely.
Transparent: Alarm output remains as long as the alarm input is active.
Trans + Timeout: Alarm output continues until event ends, then continues for the setup duration time (10 ~
150 seconds).
Timeout Duration: This function only appears when you select Timeout or Trans + Timeout options in the
Output Type drop-down list. Select a duration time for the motion event. The alarm output will last for the setup
duration time between 10 and 150 seconds.
Main Monitor: Select Full Screen to force the camera which detects motion to display full screen on the Main
Monitor. The full screen camera view will last according to the Output Type selected in the field above.
Call Monitor: Select Full Screen to force the camera which detects motion to display full screen on the Call
Monitor. The full screen camera view will last according to the Output Type selected in the field above.
Edit Motion Grid: Press the button to bring up the Motion Setting menu. To edit the motion grids, please refer
to the instructions later in this section.
Apply To: Click the button to apply the same settings to the desired cameras.
81
ECOR HD 16X1 DVR