EverFocus eZ.HD ECOR HD 16X1 User Manual page 87

Output Type: Select an output type when an alarm is triggered.
Timeout: Select this option and then set up the Timeout Duration in the field below, the alarm output will
last for the setup duration time (10 ~ 150 seconds).
Permanent: Alarm will remain active until the user presses the "Enter" key on the IR Remote Control or
resets the alarm remotely.
Transparent: Alarm output remains as long as the alarm input is active.
Trans + Timeout: Alarm output continues until event ends, then continues for the setup duration time (10 ~
150 seconds).
Timeout Duration: This function only appears when you select Timeout or Trans + Timeout options in the
Output Type drop-down list. Select a duration time for the motion event. The alarm output will last for the setup
duration time between 10 and 150 seconds.
Apply To: Click the button to apply the same settings to the desired cameras.
79
ECOR HD 16X1 DVR