Basic Connection - EverFocus eZ.HD ECOR HD 16X1 User Manual

2.3 Basic Connection

The instructions below the figure describe the basic connection for the ECOR HD 16X1.
4
Line Level
Audio In 1~16
1. To listen to audio of video source, connect speakers to the Audio Out port. Note that speaker
with a (built-in) amplifier and external power are required.
2. Connect the cameras to the DVR using the coaxial cables. eZ.HD cameras are recommended.
3. Using the supplied Power adaptor, connect one end to the 12V 6A port on the DVR and the
other end to the 12V 6A power outlet.
Note:
1. Please ensure to connect the internal power cables to the internal HDDs before
powering on the DVR.
2. For DVR with 1 or 2 HDD(s), use 12VDC 6A power adaptor; for DVR with 3 or 4
HDDs, use 12VDC 8A power adaptor.
4. Connect the line level audio input devices to the DVR. Note that the audio input devices, such
as microphones, are required to have a (built-in) amplifier and external power supply.
5. Use a standard RJ-45 cable to connect the DVR to the network for remote viewing or using
EverFocus surveillance system (Genie XMS).
6. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
7. Optionally connect a mouse to the DVR to control the system. You can also control the
system using the supplied IR Remote Control or the control buttons on the front panel.
Line Level eZ.HD Camera
Audio Out
1 2
5
Web Remote
Client
1~16
Network
Monitor
(HDMI)
CMS:
Genie XMS
14
ECOR HD 16X1 DVR
Power
Supply
3
6
7
Mouse
Main
Main
Monitor
(VGA)