Appendix E: Ir Remote Control - EverFocus eZ.HD ECOR HD 16X1 User Manual

Appendix E: IR Remote Control

The IR remote control is an accessory to enhance the convenient operation of the DVR. You can
perform all the settings and operations from the remote control. The effective distance is up to 33
feet line of sight.
When there is more than one DVR installed in the same environment, you need to select a correct
DVR ID, preventing the DVR from responding to commands from the Remote Control.
To select the DVR ID,
1. Aim at the IR receiver of your DVR.
2. Select the DVR ID number by pressing the DVR Device ID Button first.
The DVR ID number here must correspond to the "IR Remote ID"
set up in the "I/O Control Menu", and remember to click Save on
that setting page (refer to 6.9.5 I/O Control).
For example, if you set up "2" in the OSD setting page, you
need to press "2" on the controller.
3. Now you can control the DVR.
147
ECOR HD 16X1 DVR
Appendix E
DVR Device ID
Button
Channel
Button