EverFocus eZ.HD ECOR HD 16X1 User Manual page 75

Main / Sub Resolution: Select the most suitable resolution for the Main Stream and Sub Stream. If you connect
eZ.HD cameras to the DVR, the main stream resolution option will display 1280x720 only. The Sub Stream is
designed for remote operation, such as remote live view and remote playback. Please refer to 7.4 Remote Live
View for more details.
Main Stream
eZ.HD Camera: 1280x720
WD1 or D1 Camera: 960x480 / 704x480 / 352x240
Record Quality: Select a recording quality for the Main Stream and Sub Stream. The options include Low, Basic,
Standard, High and Superior. The higher the quality, the more the HDD space is used.
Normal Speed: Select a frame rate per second (FPS) for continuous recording. The speed is limited by the
maximum total recording capacity of the DVR as allocated across all the installed cameras, with upper limit of 30
FPS (NTSC) / 25 FPS (PAL) per individual camera respectively(real time recording).
Event Speed: Select a frame rate per second (FPS) for event recording.
Ratio: Select 4:3 or 16:9 display aspect ratio of a camera, and its video will be displayed in 4:3 or 16:9 format on
that channel screen. Please refer to 6.2.1.1 Display Aspect Ratio.
Record Audio: Check the box to enable audio recording on the DVR, and then select an audio input device.
PTZ ID: To allow the DVR to recognize and then control the connected PTZ camera, you have to set up an ID for
the PTZ camera. Select On and then enter an ID for the camera. This ID must match the ID address set up on the
PTZ camera. For setting up the ID address on the PTZ camera, please refer to the User's Manual of your PTZ
camera.
PTZ Speed: Select a PTZ speed from the PTZ Speed drop-down list for the camera to move to the directions
when you use the direction buttons during the configuration period.
Apply To: Click the button to apply the same settings to the desired cameras.
Sub Stream
352x240 / 176x120
67
ECOR HD 16X1 DVR