ECOR HD 16X1 DVR
Configurations
Load Factory Default: Click to restore the DVR to factory default settings. The User Account, Network IP Settings,
and Time settings will not be affected.
Load From USB: Click to upload the DVR configurations restored in the USB flash device.
Save To USB: Click to save the DVR configurations to the USB flash device.
Language: Choose which language the DVR uses.
Allowed Remote Reboot: Check the box to enable restarting the DVR via the Network.
Shutdown: Press the Shutdown button if you need to turn off the DVR. When the message as below pops up on
the screen, you can now turn off the DVR.
120