Forget Your Password; Camera Selection; Audio Selection - EverFocus eZ.HD ECOR HD 16X1 User Manual

3.3.2

Forget Your Password

1. If you forget your password, please email the Serial Number of the DVR to techsupport@everfocus.com,
and then EverFocus will send you a verification code.
2. Input this verification code in the Password field of the Login window within 24 hours, and check the
Verification Mode box.
3. Click Login to log in the DVR.
Note: This verification code is effective within 24 hours only, so please set up a new
password in the System Setting page (refer to 6.9.4 User Management).
3.3.3

Camera Selection

You can control each camera individually by selecting that camera. To select a camera, follow the instructions
below.
Using a mouse: Click a camera on the screen, and the selected camera will be highlighted with a red frame. All
cameras will be selected when you scrolling the mouse up / down between the first and the last channel. You can
also click the same layout type in the layout menu to select all cameras. For example, if your screen is in
4-division, click the 4-division layout type to select all cameras.
Using the front panel buttons: Use the arrow keys to select through the camera. The selected camera will be
highlighted with a red frame. All the cameras will be selected when pressing the right or left arrow keys to select
between the first / last camera.
3.3.4

Audio Selection

In order to utilize the audio function, please follow the instructions below before switching on the audio
function.
1. Connect the audio source and/or audio output amplifier to the DVR. Note that both of the audio input and
output devices require a (built-in) amplifier and external power supply.
2. Go to Camera setting menu (OSD Root Menu > System > Camera > Basic).
3. Select a camera in the drop down list.
36
ECOR HD 16X1 DVR