Bulb Replacement - Ski-Doo REV series 2007 Operator's Manual

Do not attempt to lift the vehicle by hand alone. Use appro-
priate lifting device or have assistance to share lifting stress in
order to avoid risk of strain injuries.
NOTE: Do not release track tension.

Bulb Replacement

Always check light operation after bulb replacement.
Headlamp
CAUTION: Never touch glass portion of an halogen bulb with
bare fingers, it shortens its operating life. If glass is touched,
clean it with isopropyl alcohol which will not leave a film on the
bulb.
Unplug burnt bulb connector. Remove the rubber boot.
1. Bulb connector
2. Rubber boot
Turn bulb locking ring counterclockwise to remove it. Detach the
bulb and replace. Properly reinstall parts.
_________________________
222
WARNING