Hitch; Shields And Guards - Ski-Doo REV series 2007 Operator's Manual

mmo2006-003-026_a
FAN COOLED — SPARE DRIVE BELT INSTALLED IN HOLDER
1. Push drive belt on LH side
2. Make sure there is no contact with air duct

40) Hitch

The hitch can be used to pull most equipment. Use a rigid tow bar.

41) Shields and Guards

Never operate engine without belt guard securely installed or,
with hood or access/side panels open or removed.
Your snowmobile is provided with a number of shields and guards.
Leave these in place on your vehicle as they are designed to keep
clothing and hands out of moving parts and away from hot compo-
nents. Never attempt to make adjustments to any moving part while
the engine is running.
_________________________
WARNING
127