Ski-Doo REV series 2007 Operator's Manual page 151

COUPLING BLOCK — RIGHT SIDE VIEW ("R" — RIGHT EMBOSSED ON BLOCK)
1. Position 1 (minimum)
2. Position 2 (minimum/intermediate)
3. Position 3 (intermediate/maximum)
4. Position 4 (maximum)
Rear Shock Motion Ratio — Damping Strength
X and XR-S Package Only
Rear shock on the above mentioned models feature 2 adjustments.
Low Speed Compression Adjuster
The low speed adjuster modifies the damping force for small suspen-
sion velocities. This adjuster has 5 turns of adjustment. Use a flat
screwdriver to adjust it. Turning it clockwise increases shock damp-
ing action (stiffer) for these low compression speeds.
High Speed Compression Adjuster
The high speed adjuster modifies the damping force for high suspen-
sion velocities. Use a 17 mm wrench to adjust it. Turning it clock-
wise increases shock damping action (stiffer) for these high com-
pression speeds.
_________________________
149