Ski-Doo REV series 2007 Operator's Manual page 38

CAUTION: Ask your dealer for the appropriate tunnel protectors
model and kit number required for your snowmobile.
NOTE: Consult the BRP limited warranty to find out what warranty
limitations are related to the use of studs.
Installation of Studs on BRP Approved Tracks
Never stud a track that has not been approved for studs. Ap-
proved tracks can be identified by a stud symbol (see illustra-
tion below) molded into the track surface. Installing studs on
an unapproved track could increase the risk of the track tear-
ing or severing, possibly resulting in serious injury or death.
APPROVED TRACKS CAN BE IDENTIFIED BY THIS SYMBOL
To ensure safe and proper installation, BRP recommends to have the
studs installed by your dealer.
– Use only studs, mounting plates and nuts sold by BRP.
– Never use studs that exceed the height of your snowmobile's
track profile by more than 9.5 mm (3/8 in).
_____
36
WARNING
SAFETY INFORMATION
_____