Sequencer; Transport Controls; Standard Midi Files And Mp3; Songs And Voice Processor Presets - Korg Pa3XLe User Manual

Sequencer

The Sequencer operating mode is the full-featured onboard
sequencer, where you can create a Song from scratch, or edit it.
You can also use this mode to edit the initial parameters of a
Standard MIDI File, either made with an external sequencer or
with Pa3XLe's own sequencer.
You can save the new or edited Song as a Standard MIDI File
(SMF, i.e., a file with the ".MID" extension), and play it back
either in Song Play or Sequencer mode – or on any external
sequencer.

Transport controls

To play back a Song, use the PLAYER 1 transport controls (i.e.,
the one on the left side of the PLAYER area). While in Sequencer
mode, Player 2 controls are deactivated.

Standard MIDI Files and MP3

The Songs and the Standard MIDI File format
The native Song format for Pa3XLe is the Standard MIDI File
(".MID" file).
When saving a Song as a SMF, a setup measure is automatically
inserted at the beginning of the Song. This measure contains
various Song initialization parameters.
Sequencer mode and the MP3
While in Sequencer mode, you cannot load nor record MP3
files. This mode only allows for editing of the Standard MIDI
Files.

Songs and Voice Processor Presets

You can use the Voice Processor while in Sequencer mode. For
this, just two settings are needed:
• Select the Song track where you are recording chords for
the Voice Processor (see "Song Control" on page 272).
• Select the desired Voice Processor Preset.

Sequencer Play - Main page

Press the SEQUENCER button to access this page from another
operating mode. In this page you can load a Song, and play it
back using the PLAYER 1 transport controls.
Note: When switching from Style Play to Sequencer mode, the
Sequencer Setup is automatically selected, and various track
parameters may change.
To return to this page from any of the Sequencer edit pages,
press the EXIT or SEQUENCER button.
To switch between Song tracks 1-8 and 9-16, use the TRACK
SELECT button.
Song area Page header
Selected
track info
area
Sounds
area
Track volume/status area
Page header
This line shows the current operating mode and transposition.
Operating mode Master Transpose (in
semitones)
Operating mode name
Name of the current operating mode.
Master Transpose
Master transpose value in semitones. This value can be changed
using the TRANSPOSE buttons on the control panel.
Note: Transpose may be automatically changed when loading a
Standard MIDI File generated with an instrument of the Korg Pa-
Series.
Page menu icon
Touch the page menu icon to open the menu. See "Page menu"
on page 202 for more information.
Sequencer 181
Transport controls
Page menu icon