Double Size - Korg Pa3XLe User Manual

Professional arranger
Table of Contents

Advertisement

428
Effects

Double Size

Double Size
Double-size effects can only be assigned to the FX2 processors
(either in the A or B FX group).
110: St. Mltband Limiter
(Stereo Mltband Limiter)
This is a stereo multiband limiter.
Stereo In - Stereo Out
Band-Pass Filters
Left
Low
Envelope - Control
Mid
Envelope - Control
High
Envelope - Control
Envelope - Control
Low
Envelope - Control
Mid
Envelope - Control
High
Right
Offset
1.0 : 1...
a
Ratio
50.0 : 1, Inf : 1
b Threshold [dB] –40...0
c
Attack
1...100
d Release
1...100
e
Low Offset [dB] –40...0
f
Mid Offset [dB] –40...0
High Offset
g
–40...0
[dB]
Gain Adjust
–Inf,
[dB]
–38...+24
h
Src
Off...Tempo
Amt
–63...+63
Dry, 1:99...99:1,
Wet/Dry
Wet
i
Src
Off...Tempo
Amt
–100...+100
FX Amt
Limiter
Limiter
Gain Adjust
Limiter
Limiter
Gain Adjust
Limiter
Limiter
FX Amt
Sets the signal compression ratio
Sets the level above which the
compressor is applied
Sets the attack time
Sets the release time
Sets the low range gain of trigger
signal
Sets the mid range gain of trigger
signal
Sets the high range gain of trigger
signal
Sets the output gain
Selects the modulation source for
the output gain
Sets the modulation amount of the
output gain
Balance between the wet and dry
signal
Table , "Dynamic Modulation
sources, " on page 366
Amount of modulation source
111: PianoBody/Damper
(PianoBody/Damper Simulation)
This effect simulates the resonance of the piano sound board
caused by the string vibration, and also simulates the resonance
of other strings that are not being played when you press the
damper pedal. It will create a very realistic sound when applied
to acoustic piano sounds.
FX Amt = 100: Mono In - Stereo Out / FX Amt = 0: Stereo In - Stereo Out
Left
+
Piano
Body/Damper
Simulation
Right
D
-mod
Damper
Sound Board
a
0...100
Depth
Damper Depth 0...100
b
Src
Off...Tempo
c
Tone
1...100
d Mid Shape
0...36
e
Tune
–50...+50
Dry, 1:99...99:1,
Wet/Dry
Wet
f
Src
Off...Tempo
Amt
–100...+100
a: Sound Board Depth
This parameter sets the intensity of resonance of the piano
sound board.
b: Damper Depth
b: Src
This parameter sets the resonance intensity of the other strings
created when the damper pedal is pressed. The "Src" parameter
selects the modulation source from which the damper effect is
applied. Usually, select Damper #64 Pdl (Damper pedal).
The effect is off when a value for the modulation source specified for
the "Src" parameter is 63 or smaller, and the effect is on when the
value is 64 or higher.
c: Tone
d: Mid Shape
These parameters control the tonal quality of the effect sound.
e: Tune
Since this effect simulates the resonance of the strings, the sound
varies depending on the pitch. If you have changed tuning using
the "Master Tuning" (Global > General Controls > Basic), adjust
this parameter value.
FX Amt
FX Amt
Sets the intensity of resonance of
the sound board
Sets the intensity of the string
resonance created when the
damper pedal is pressed
Selects the modulation source of
damper effect
Sets tonal quality of effect sound
Sets the mid range of tonal quality
Fine tuning
Balance between the wet and dry
signal
Table , "Dynamic Modulation
sources, " on page 366
Amount of modulation source

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents