General Controls > Interface - Korg Pa3XLe User Manual

254 Global
General Controls > Interface
General Controls > Interface
This page contains parameters related to user interface.
Language
Language
Use this pop-up menu to select one of the available languages for
the on-screen keyboard.
Note: Some of the characters can only be used when editing Song-
Book Entry names.
Change button
To apply the selected language to the onscreen keyboard, touch
this button and restart the instrument as described below.
How to select a language
Since Pa3XLe must be restarted at the end of this proce-
1.
dure, be sure to first save all unsaved data.
2. While in this page, select a language from the pop-up
menu.
The "Change" word will start flashing. Touch it.
3.
4. A message will ask you to reboot the Pa3XLe. Touch OK to
close the message window.
Set Pa3XLe to standby, then on again.
5.
Background Color
Color
Use this parameter to choose a different color scheme for the
display.
Display Hold
On/Off
When this parameter is checked, if you open a temporary win-
dows (like the Sound Select window), it remains in the display
until you press EXIT or an operating mode button. When it is
not checked, any temporary window closes after a certain time.
Program Change
Show
Check this parameter to show Program Change numbers next to
Sound names in the Sound Select window. By default, this
parameter is turned on.
Note: Program Change numbers are always shown in the various
Track Info areas.
Track Activity
Show
Use this parameter to turn on/off the Track Activity display.
When it is turned on, you can monitor events coming from the
tracks or the MIDI inputs. Incoming events are shown by the
color changing on each track's label.
Auto Select
Style
When this parameter is checked, the latest selected Style is
immediately selected when pressing the STYLE button corre-
sponding to the bank.
This way, you can assign your preferred Style to each control
panel's button, and select it just with a single press.
However, the Style Select window still appears when you press
one of the STYLE buttons corresponding to the bank, so you can
select a different item if desired.
Performance
When this parameter is checked, the latest selected Performance
selected in a bank is immediately selected when pressing the
PERFORMANCE button corresponding to the bank.
This way, you can assign your preferred Performance to each
control panel's button, and select it just with a single press.
However, the Performance Select window still appears when you
press one of the PERFORMANCE buttons corresponding to the
bank, so you can select a different item if desired.
Save
Touch this button to save the current Style and Performance
assignment. You will find the saved assignment when turning
the instrument on again.