Playing The Sequencer - Korg monologue Owner's Manual

3.
Adjusting the OCTAVE range and the DRIVE knob, and the using the
Slider.
As you play, you can use the five-way OCTAVE Switch to
transpose the playing area of the keyboard by ± 2 octaves.
Turn the DRIVE knob to adjust the drive effect, which adds
harmonics and distortion to the sound.
In addition, you can move the Slider from left to right to add
real-time performance control.
The parameter assigned to the slider will vary depending
TIP
on the Program. Rrefer to "Program List" (p. 55) to see
which parameter is assigned to the slider in each Program.
The Slider Assign function in PROGRAM EDIT mode is used to as-
TIP
sign parameters to the slider ("Slider Assign", p. 31).

Playing the Sequencer

Each Program in the monologue includes sequence data. In this section, we'll
play the sequence data saved as part of the preset Programs.
1.
Turn the PROGRAM/VALUE knob to select a Program.
The display will indicate the Program name and number.
2.
Press the PLAY button in the SEQUENCER section.
The sequence data that is recorded in the current Program will begin playing.
The 1–16 buttons will light up in steps while the sequencer is playing.
If you press the KEY TRG/HOLD button (the button will stay lit) in-
TIP
stead of the PLAY button and then play the keyboard, the sequence
data will play back while a key is being pressed. If you hold down
the KEY TRG/HOLD button (the button will begin to blink) and then
play the keyboard, the sequence data will keep playing back, even af-
ter you take your hand off the keyboard. Press a different key on the
keyboard while holding down the KEY TRG/HOLD button as it lights
or flashes, to play back the sequence data transposed.
2, 3
10
1
1