Mic > Preset
The Voice Processor applies effects and three-part harmony to
your voice. The dedicated controllers in the MIC SETTING sec-
tion on the control panel allows you to quickly access the most
often used functions.
In addition, in these pages you can edit the various effects and
harmony styles, and save them into a Voice Processor Preset (VP
Preset). With the latest two pages, you can edit the general set-
tings for the singer's voice.
This page allows you to select a VP Preset, as well as turning on
or off the various Voice Processor modules.
Current Voice Processor Preset
Use this parameter to select a Voice Processor Preset. A VP Pre-
set is the programming of all Voice Processor's harmony and
effect parameters. The Current Voice Processor Preset is the VP
Preset that is currently selected and can be edited.
A VP Preset can be recalled by a Style, a Performance, a Song-
Book Entry, or can be manually selected by pressing the PRESET
button in the MIC SETTING on the control panel. This Preset is
alternative to the Global VP Preset (see "Global Voice Processor
Preset" on page 275) that is used when no selection is saved in a
Style, Performance or SongBook Entry.
If you wish to save your VP Preset settings, keep the PRESET
button pressed for about one second, or select the "Write Voice
Processor Preset" command from the page menu (see page 280).
The saved Preset will appear in the list of the available Presets.
Harmony Voices On/Off
These are "switches" for the voices generated by the Harmony
These checkboxes allow turning each of the three Harmony
Voices on or off.
This is the same as the "Voice On/Off "checkbox in the "Mic >
Harmony Voices" page (see page 273).
These are "switches" for the various Voice Processor sections.
This checkbox allows turning the Lead voice on or off. This is
useful in creating Presets where you want to hear harmony
This checkbox allows the enabling/disabling of the Harmony
This checkbox allows the enabling/disabling of the Voice Proces-
sor Effects module.
Mic > Harmony
In this page you can define general parameters for the Harmony
This checkbox allows enabling/disabling of the Harmony mod-
ule. It is the same control found in the "Preset" page.
This parameter changes the Preset's harmony mode. The avail-
able options are: Scalic, Chord, Shift, and Notes. See "Harmony
and Tuning with the Voice Processor" on page 276 for a full
description of each harmony mode.
(Only available in Scalic mode). In Scalic presets this sets the
In Scalic presets this sets the scale type. If the selected type is
Custom, a Custom Map can be used (see "Custom Voice Map-
ping" on page 273).
Pitch Bend control assignment. Allows assignment of the pitch
bend to Pitch (applicable in Notes and Chord harmony modes).
Mic > Preset