Saving Your Settings To A Performance - Korg Pa3XLe User Manual

48 Selecting and saving Performances

Saving your settings to a Performance

2
Select one of the Performances in the Performance Select window, then press the EXIT
button to close the window.
After pressing the EXIT button, the Performance Select window closes, and the
main screen appears again. Sounds, Effects, and other settings, change accord-
ing to the setting memorized in the selected Performance.
Note that Selection windows may automatically close after a selection. To do this, uncheck the
"Display Hold" box in the Global > General Controls > Interface page. In this case, press the
EXIT button only if you don't make any selection but want to close the window.
3
Play the keyboard.
Saving your settings to a Performance
The Sounds and Effects assigned to the Keyboard tracks, together with the parameters you can access
by pressing the MENU button while in Style Play and Song Play mode, can be saved into a single Per-
formance, to be quickly recalled at a later time.
1
Keep one of the PERFORMANCE buttons pressed for about one second to open the
Write Performance dialog box.
Settings memorized in the selected Performance have been
selected. Sounds, effects and other settings have been recalled.
i
Note: If the
LED of the
STYLE CHANGE
button is
turned on, selecting a Perfor-
mance may automatically
select a different Style and its
settings (Sounds, Effects for
the Style tracks...)
i
Hint: To open the Write
Performance dialog box, you
can also choose the 'Write
Performance' command
from the page menu.